|
In 1964 Schuler Management made the commitment.
Cubic Feet 1050
"Quality Built - to Last Longer"
Schuler is committed to the best possible factory service to our customers. The Schuler factory located int he USA provides this important advantage.
Overlapping auger design. With each revolution of the augers, feedstuffs are pulled out of the opposite auger chamber, positively creating exchange of feedstuff between the augers. Overlapping augers also speed up the cleanout of feedstuffs. Also, baffles between augers are small. Large baffles slow cleanout and restrict end-to-end feed mixing.
Directional baffles between the augers are uniquely designed to produce end-to-end feed movement by being offset from the centerline of the mixing tub. The RH baffle perpindicular center edge is closer to the front auger and the LH baffle perpindicular center egde is closer to the rear auger. Because the baffles are offset, feedstuffs quickly transfer between the adjacent augers which is essential for consistent mixing.
Tri-pulse legs on both augers enhance mixing and cleanout.
Replaceable edge deflector on the auger pulls feedstuffs from the mixer sidewalls to load the center of the auger and reduce mixing time.
Variable pitch auger flighting reduces horsepower robbing feed drag between the flights. Flighting is 5/8" thick, AR200.
Mixer chamber sides are 1/4" thick. Mixer floor is 3/4" thick. Sides are AR200 steel.
| MS1050 SPECIFICATIONS: |
| Mixing capacity, no extensions (1) |
1050CF |
| Mixing capacity with extensions, 8" rubber (1) |
1155CF |
| Loading height, no extensions |
123" |
| Front discharge height w/folding bunk ext., low, no magnets* |
39" |
| Front discharge height w/folding bunk ext., (2-3/4"), no magnets* |
56" |
| Front discharge height (flat) only, no magnets |
39" |
| Overall length, front discharge and no rear door** |
300" |
| Overall width mixer w/front discharge and folding bunk ext., up, no magnets** |
118" |
| Overall width mixer w/front discharge and folding bunk ext., down, no magnets** |
132" |
| Overall width mixer w/front discharge (flat) only, no magnets** |
120" |
| Weight w/front discharge and folding bunk extension, approx |
20,600 lbs. |
* Measurements approx. with standard 22.5 wheels and tires, 18" drawbar height
**Rear discharge door option, add + 10"
(1) Mixing capacity arrived at by taking "AS FED" feed samples in a cubic foot box, weighing each sample, then dividing cubic foot weight into the total weight of feed mixed in the mixer. For reference, dairy rations sampled weighed from 20 lbs. to 23 lbs. a cubic foot. |
Photos:
|
