|
In 1964 Schuler Management made the commitment.
Cubic Feet 725
"Quality Built - to Last Longer"
Schuler is committed to the best possible factory service to our customers. The Schuler factory located int he USA provides this important advantage.
Overlapping auger design. With each revolution of the augers, feedstuffs are pulled out of the opposite auger chamber, positively creating exchange of feedstuff between the augers. Overlapping augers also speed up the cleanout of feedstuffs. Also, baffles between augers are small. Large baffles slow cleanout and restrict end-to-end feed mixing.
Directional baffles between the augers are uniquely designed to produce end-to-end feed movement by being offset from the centerline of the mixing tub. The RH baffle perpindicular center edge is closer to the front auger and the LH baffle perpindicular center egde is closer to the rear auger. Because the baffles are offset, feedstuffs quickly transfer between the adjacent augers which is essential for consistent mixing.
Tri-pulse legs on both augers enhance mixing and cleanout.
Replaceable edge deflector on the auger pulls feedstuffs from the mixer sidewalls to load the center of the auger and reduce mixing time.
Variable pitch auger flighting reduces horsepower robbing feed drag between the flights. Flighting is 5/8" thick, AR200.
Mixer chamber sides are 1/4" thick. Mixer floor is 3/4" thick. Sides are AR200 steel.
| MS725 SPECIFICATIONS: |
| Mixing capacity, no extensions |
725 cubic feet |
| Mixing capacity with extensions |
820 cubic feet |
| Loading height, no extensions |
100"* |
| Overall height, no extensions |
108"* |
| Front discharge height w/folding bunk ext., low, no magnets** |
33"* |
| Front discharge height w/folding bunk ext., (2-3/4"), no magnets** |
50"* |
| Front discharge height (flat) only, no magnets |
33"* |
| Overall length, front discharge and no rear door*** |
296" |
| Overall width mixer w/front discharge and folding bunk ext., up, no magnets** |
115" |
| Overall width mixer w/front discharge and folding bunk ext., down, no magnets** |
130" |
| Weight w/front discharge and folding bunk extension, approx |
15,800 lbs* |
|
* Measurements are approx. only. Variable dimesions may vary with different truck models
** Magnets add 12" to length and reduce ground clearance at bottom of spout by 10"
***Rear discharge door option, add + 12"
All specifications are based from trailer mount models as with trucks; they have variable heights. Consult your local dealer or call Schuler Manufacturing for assistance.
|
|
