|
FEED LONG CUT TUB GROUND HAY, SILAGE AND GRAINS
- Four different apron speeds, plus neutral, no gearbox.
- 667X pintle chain used in floor apron, 662 pintle chain used in cross conveyor. All pin heads spot-welded, longer life.
- Stake pockets for sideboards, standard equipment.
- Big capacity 26" wide discharge conveyor.
- Conveyor extends 4" back under floor apron.
- Conveyor pulled from dischargeend, not pushed, longer life.
- Optional 4' unloading elevator with hydraulic lift kit.
- 18" long spiral beater teeth with anti wrap design.
- By laying feeds as you load, a degree of mixing can be had.
- Sealed bearings, widely used, with re-lube feature.
- Rugged construction, 10 ga. steel floor, 12 ga. sides.
SCHULER HF295 FEED WAGON
[Click here to product brochure]

|
SPECIFICATIONS
|
|
Specifications gathered from HF295 (Subject to change)
Based on 19" tractor drawbar height and 385/65R22.5 tire
|
| Frame clearance above ground |
15" |
| Loading height, to top of steel side |
84" |
| Loading height, to top of 10" opt. sideboard kit |
94 ½" |
| Inside box side height, to top of steel |
48" |
| Inside box side height, to top of 10" sideboard |
57 ½" |
| RH side outside of tire to folded up cross conveyor extension |
100" |
| Empty weight, approx. |
4615 lbs. |
| Hitch weight when empty, approx. |
800 lbs. |
| Hubs-8-bolt, 8-6, 5/8: bolt, Load rated each |
800 lbs. |
| Inside box length from rear forward to front apron shaft |
163" |
| Inside length from front back to front apron shaft |
22" |
| Depth of cross conveyor below apron floor |
12" |
| Distance from folded up LH side cross conveyor extension tip to outside of RH tire |
102" |
| Number of beaters |
2 |
| Folding cross conveyor extension length, shaft to shaft |
40" |
| Cross conveyor inside width |
26" |
| Ground clearance of fully extended cross conveyor extension, taken at the end of the conveyor |
36" |
SCHULER HF-255 TUB GROUND HAY FEEDER [Click here for product brochure]

|
SPECIFICATIONS
|
| Inside box length |
11'5" |
| Inside box width below flare |
5' |
| Inside box width above flare |
5'8" |
| Inside box depth less sideboards |
3'9" |
| Overall height, 20" tires |
6'6" |
| Overall width, transport |
7'11" |
| Overall width, spout / elevator down 40 degree |
11'3" |
| Capacity C.F. less sideboards |
255 |
| Capacity C.F. with 10" sideboards |
322 |
| Weight, 22.5" tires, lbs. |
3300 |
SCHULER HF-255 TRUCK MOUNT UNITS
|