|
SCHULER HF-255 TUB GROUND HAY FEEDER
FEED LONG CUT TUB GROUND HAY, SILAGE AND GRAINS
- Four different apron speeds, plus neutral, no gearbox.
- 667X pintle chain used in floor apron, 662 pintle chain used in cross conveyor. All pin heads spot-welded, longer life.
- Stake pockets for sideboards, standard equipment.
- Big capacity 26" wide discharge conveyor.
- Conveyor extends 4" back under floor apron.
- Conveyor pulled from dischargeend, not pushed, longer life.
- Optional 4' unloading elevator with hydraulic lift kit.
- 18" long spiral beater teeth with anti wrap design.
- By laying feeds as you load, a degree of mixing can be had.
- Sealed bearings, widely used, with re-lube feature.
- Rugged construction, 10 ga. steel floor, 12 ga. sides.
|
SPECIFICATIONS
|
| Inside box length |
11'5" |
| Inside box width below flare |
5' |
| Inside box width above flare |
5'8" |
| Inside box depth less sideboards |
3'9" |
| Overall height, 20" tires |
6'6" |
| Overall width, transport |
7'11" |
| Overall width, spout / elevator down 40 degree |
11'3" |
| Capacity C.F. less sideboards |
255 |
| Capacity C.F. with 10" sideboards |
322 |
| Weight, 22.5" tires, lbs. |
3300 |
Model HF355
The HF355 is a high-volume capacity feed wagon for - ground hay, ground corn stalks, haylage, corn silage, grain with roughage - with the ease of maneuvering trailer design.
OPTIONS
- Conveyor extension - 18" (S. to S.) Fixed, or 32" (S. to S.) Hydraulic Folding
- Tires - Wide, Flotation 385/65R22.5 Recap (shown) or Traction Grip Recap 315/80R22.5
- Digital Electronic Scales, Rugged 4 - Weigh Bar Design
- Truck Mount Model
When it is time to feed your cattle, PERFORMANCE is what the HF355 is all about - all hydraulic drive, twin beaters that agitate feestuffs while unloading, variable speed apron to match unloading rate of your feedstuff all in a simple, easy to use and maintain design.
10 QUALITY REASONS TO BUY THE HF355
- Adjustable hitch clevis. Easily matches tractor drawbar height.
- Jack rated at 5000 lbs. Each supports weight of loaded HF355.
- Trailer, axle, 8-bolt hubs, wheels and tires designed to carry up to 6 TON load.
- Trailer frame designed out of structural grade, heavy wall tubing. Rectangle tubing frame - 8" x 3", tongue hitch - 8" x 4".
- Reliable CA557 roller chain used in cross conveyor. Conveyor is 36" wide and is 12" below the florr of the apron chain for high volume unloading capacity in bulky feedstuffs.
- Hydraulic drive, no driveshaft to bend, unload while turning. Adjustable rate speed control for the apron chain and beaters makes quick work of unloading a full load of tub ground hay or silage. Requires 10-15 gpm from the tractor hydraulics and 1 or 2 hydraulic outlets depending on conveyor option chosen.
- 667XC high strenght pintle chain with double-spot welded pin heads provides long and trouble free service life from the apron chain. Spring compression apron chain tighteners extend time between adjustments.
- Two beaters agitate and break up feedstuffs during unloading, making for consistent feedout.
- Heavy-duty construction throughout - 3/16" steel floor, 10 ga. sides, 10 ga cross conveyor floor, all cold drawn steel 1/1/4" shafts except apron shaft which is 1-1/2", all pillow block mounted bearings.
- Only two #60 roller chain drives keeps the HF355 simple with little regular adjustment required. The HF355 is designed to work day in and day out.
|
SPECIFICATIONS
|
| Loading Height @ 14" tractor drawbar height and 315/80R22.5 tires |
7'10"
|
| Overall front width, folding conveyor ext. up |
9'7"
|
| Overall front width, folding conveyor ext. flat |
10'9"
|
| Center of tongue hitch to end of folding conveyor ext. flat |
7'
|
| Inside width of box |
6'6"
|
| Inside length of box, apron shaft to rear |
14'2"
|
| Inside side depth of box including 10" sideboard |
46"
|
| Overall length, rear to tip of tongue hitch |
21'6"
|
| Empty weight with folding conveyor ext., wheels ad tires |
6,145 lbs.
|
| Empty tongue hitch weight |
1,080 lbs.
|
| Cubic foor load capacity, struck level full, including 10" sideboards |
355
|
| Maximum load weight capacity |
6 ton
|
|
